MAXAIR® CAPR® Helmet
Controlled Air Purifying Respirator
The MAXAIR integrated Helmet places the motor-fan, filter, and all electronics in the Helmet. This eliminates the two most disliked components of most conventionally designed PAPRs.
- There is no long, cumbersome air tube (hose)
- Eliminates chances of getting caught on nearby objects
- Eliminates difficulty sitting in a chair and operating vehicles
- There is no bulky waist/back-mounted blower unit
- Eliminates awkwardness working in tight spaces
- Eliminates costly time consuming cleaning
MAXAIR's Advanced Design makes you more
- Safe
- Mobile
- Maneuverable
- Comfortable
- Convenient
- Cost Effective
How It Works
Toxic Air 1 (Red Arrows) is pulled by the Motor 2 in under the FCC 3 (or in through the Hood top, not shown)
The Toxic Air is then filtered to Clean Air 4 (Green Arrows) as the Motor pulls it through the Filter 5
After passing down through the blower the Clean Air moves through the Laminar Flow area 6 , through the front Air Diffusers 7 , and gently down between the Lens and face 8
Simple, Comfortable, Safe
- Diffused, clean, cooling air passes down around the wearers' face
- CO2 exhausted automatically
- Lens defogged by airflow automatically
Additional User Advantages of MAXAIR's Advanced Design
Safe - Always on and Visible HUD LEDs
- Front mounted LED's display critical information from system/airflow micro-computer controller.
- LED's provide real time HUD to wearer in upper peripheral vision.
- Constant during use awareness of safe air flow and battery run time conditions.
- No confusing audio alarms.
- No need to stop and make manual checks, look away from activity, or ask a helper to read a "fuel gauge".
All five LEDs are shown on as is the case each time the Helmet is powered on.
NOTE: LEDs are illustrated; Actual display is only visible to wearer.
More Comfortable
1. Air Diffusers Assist in Low Noise Operation, ≤ 62dB. Evenly dispersed air for Comfort and Anti-Lens-Fogging
2. Front Comfort Strip (Disposable)
3. Rear Comfort Pad (Cleanable)
4. Easy grasp-and-turn Ratchet to adjust head circumference and secure helmet-to-head
Safe Turnlock Power Cord Connector
5. Provides safe connection and easy connect/disconnect
Allows Helmet to be removed if in standby
User Selectable Comfort Level
6. Set Air-Flow Range to meet activity, comfort level
Computer controlled constant flow througout battery run-time
MAXAIR Systems
Meet Today's Needs And Tomorrows Expectations:
MAXAIR CAPR® Systems are advanced respiratory protection systems that meet all OSHA loose fitting (no Fit Testing required) PAPR requirements.
Click on Market images below for more information.
Healthcare Environments
Cuff
For situations requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For situations where full 360° coverage and protection of face, head and neck is desired, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PH
When maximum body coverage, high fluid protection, and safety in doffing top the requirements list. A single piece, 360° full head to below-the-shoulders cover for routine use throughout the healthcare facility. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PH Style Single Hood
- Front Materials below filter line: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Back materials: AAMI Level 3 with >96% OPR (Source Control)1,2
- No need for additional mask/N95 respirator2
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
HFR FCC Hood, PB
For Ebola and other severe Pandemic Level situations that may require very high fluid resistance (360°) in addition to the highest protection against airborne particulates.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials below filter line: AAMI Level 41
- Filter: AATCC 127 50 cm1
- HFR FCC provides a fluid impermeable cover over the entire Hood Filte
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Healthcare Facilities
Surgery/OSC/ASC Environments
Hood, PRS
For sterile applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all situations requiring sterile technique. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PRS1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97%4 HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
2 HIGH APF (1,000)
Hood, PR
For applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all non-sterile head cover situations. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PR1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
Shroud
For non-sterile applications requiring maximum body coverage, high respiratory protection, and high fluid protection, with a more cost-effective solution. A single piece, 360° full head to below- the-shoulders cover where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 outer shroud materials
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 APF (1,000)
2 ANSI/AMMI PB70:2020
Cuff
For nonsterile situations where the most cost-effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Surgery/OSC/ASC
EMS/Pandemic Environments
Cuff
For situations where the most cost effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For emergency situations calling for full 360° coverage and both higher respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PB
For those more extreme emergency situations where a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the peace-of-mind for you to focus completely on your job while under stress.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
EMS/Pandemic
Dental Environments
Cuff
For most Dental cases requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For Dental Practitioners with a higher percentage of cases with splash potential that calls for full 360° coverage and both respiratory and fluid protection of face, head and neck. Since filters are protected by the Filter Cover Cap, re-use reduces on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 materials
Safety with Convenience: 99.99% Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1HIGH APF (1,000)
2ANSI/AMMI PB70:2020
Dental
Bio/Pharma Environments
Shroud
For situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PB
For when activities call for a single piece, full 360° coverage, respiratory and fluid protection system to allow the piece-of-mind for you know you are safe on your job.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency, High APF, High Fluid Resistance
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Bio/Pharma
Laboratory Research Environments
Shroud
For situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter2
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2HIGH APF (1,000)
Hood, PB
For those “unexpected” and emergency situations when a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the piece-of-mind for you to focus completely on your job.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- ptional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency, High APF, High Fluid Resistance
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Cuff
For situations requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unitFull Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Laboratory Research
Restoration Environments
Shroud
For cleanup situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 HIGH APF (1,000)
2 ANSI/AMMI PB70:2020
Hood, PB
When some cleanup situations call for even more protection - a single piece covering of the entire Helmet, Head, and Neck for maximum protection, fast and safer donning and doffing, and high levels of fluid resistance.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PH Style Single Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
Cuff
For more common cleanup situations where there is need for the most cost-effective full face high protection factor respiratory and contact protection
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Affordable: Most economical PAPR change-out from user to user
Restoration
Nuclear Environments
Hard Hat
For many outage maintenance situations that require respiratory and contact protection against particulate contaminants, and full head and face impact protection when working in awkward spaces.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- XP Filter1
- Optional ANSI Z87.1 Impact Lens is available
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud, Level 42 (Optional alternate Cuff is available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 HIGH APF (1,000)
2 Materials: Level 4, ANSI/AAMI PB70:2020
Shroud
For situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 outer shroud materials
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 HIGH APF (1,000)
2 ANSI/AMMI PB70:2020
Hood, PB
When activities call for even more protection - a single piece covering of the entire Helmet, Head, and Neck for maximum protection, fast and safer donning and doffing, and high levels of fluid resistance.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: NIOSH 99.97%2 HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Nuclear
Healthcare Facilities
Surgery/OSC/ASC
EMS/Pandemic
Dental
Laboratory Research
Bio/Pharma
Restoration
Nuclear
MAXAIR Testimonials
Autoplay muted at start - sound available
Protecting You With Every Breath
You deserve & need the best Powered Air Purifying Respirator (PAPR) on the market.
